UNIQUE: Soundproofing sliding door with 45 dB in combination with T30 RS.
Soundproofing verified according to DIN EN ISO 140-3.
Execution with 1- or 2-leaves possible.
The door leaf consists of several 300 - 1100 mm wide elements (depending on the door width). The separate elements are joined to a sturdy door leaf through a special linking system. The thickness of the door leaf is only 63 mm. The surface consists of zinc-coated 1,5 mm thick steel sheets. The running-in profile and the labyrinth profile are zinc-coated. Soundproofing sliding door certified according to DIN EN ISO 140-3. This door reaches a soundproofing value of 45 dB (Rw,P). Higher soundproofing requirements and special equipment are available on request.
Each door element is guided in ball bearing mounted castors. The cold-milled, zinc-coated C-profiles are mounted to the ceiling by means of brackets. The guide rail casings are zinc-coated.
As fittings a C-shaped handle is used on the opposing wall, a shellshaped handle on the wallside. The opening of the door is limited by end position dampeners which are mounted on consoles. The door closes automatically due to closing weights, while a constant closing speed is ensured by a hydraulic closing speed control. As a standard feature a free-run device enables the door to be handled easily under normal application conditions. An electric drive with dead-man's control or pulse contact control is possible.
colouring according to RAL, DB or NCS
Hatch or emergency EXIT door
Round and square glazing
Impulse control, time closing, battery buffering
Push button, key switch, pull switch, IR-/radar motion sensor, radio, induction loop, under-glass release button
Flash light, light barrier, low