Ideal in order to create bright halls suffused with light.
Convincing through its shadowless illumination of rooms.
Door Leaf:
The fibre glass sections are surrounded by 40 mm thick aluminium profiles. Door systems up to a maximum width of 6000 mm can be executed with the Sun Line 40. Apart from a high stability and good heat transfer coefficients the fibre glass sectional door ensures bright rooms suffused in light and a shadowless illumination.
The fibre glass can be delivered in two colours "crystal" and "turquoise".
The castors are inserted in the front side of the sections and are not visible in mounted condition. The floor and lintel sealing consists of EPDM profiles with a lip seal.
Door:
The fibre glass sectional door can be additionally equipped with a postern door. The standard threshold height is appr. 145 mm. Upon request the postern door can be fitted with a low threshold of appr. 25 mm. As main optoelectronic safety edge a light barrier in advance is employed. The configuration of the door can take place individually. The postern door is executed including door closer and door handles. Furthermore we manufacture side doors and fixed fields, available in the same designs as the door leaf.
Surface:
Structural surface in two colours "crystal" and "turquoise". Upper, lower and lateral profiles consist of natural aluminium. For the 40 mm thick door leaf the profiles E6/EV1 are executed anodised. The frames can be painted in RAL to choice if so required.
Fittings:
Standard fittings for a lintel height of at least 470 mm at a door leaf thickness of 40 mm. Further types of fittings such as high lift fittings, fittings for slanted roofs or vertical fittings are possible.
Guide Rails:
The vertical guide rails come with an inner and outer profile seal up to the lintel, a round anti-trap protection as well as an integrated track cable duct.
Operation:
Manually via a hand chain or an electric drive. Individually adjusted springs above the lintel ensure a balanced running of the door.For large doors, doors with frequent cycles or higher speed an electric drive without spring compensation is advisable. This advantageous drive technology is very maintenance-friendly and ensures a long lifespan.
Supplementary Equipment:
- Heat transfer coefficient can be improved with slots in the sections
- Body soundproofing of the guide rails
- Safety features (light barrier, flash light and/or omnidirectional light)
- Impulse transmitter (push button, key switch, pull switch, code switch, radar detector)
- Radio control
- Light barrier
- Induction loop
- Further information on request